很多人在使用油煙凈化器工作時，會遇到很多突發狀況，近來比較常見的一種狀況是油煙凈化器不能正常凈化油煙，這給自己帶來比較大的麻煩，那么這應該怎么辦呢？

　　A lot of people will encounter a lot of emergencies when using the lampblack purifier. Recently, one of the most common situations is that the lampblack purifier can't purify the lampblack normally, which brings big trouble to itself. So what should we do?

　　油煙凈化器不能凈化油煙比較直觀的表現就是在排氣口可以看到一股清澈的白色油煙。一般來說，這種情況是由于風量匹配不當造成的。在匹配風量的過程中，我們需要匹配適合廚房環境的風量。有多少爐子，我們會根據爐子的數量來匹配風量。然后根據匹配好的油煙凈化器的風量，匹配大功率的風機，匹配方式廠家一般都有自己的標準。

　　Lampblack purifier can not purify lampblack more intuitive performance is to see a clear white lampblack in the exhaust port. In general, this situation is due to the wind volume mismatch caused by. In the process of matching the air volume, we need to match the air volume suitable for the kitchen environment. How many stoves? We'll match the air volume with the number of stoves. Then, according to the air volume of the matched lampblack purifier, the high-power fan is matched. The manufacturers of matching methods generally have their own standards.

　　值得注意的是濟南油煙凈化器的風量不宜過大或過小。大家都知道，火柴小了，不可能把廚房油煙都凈化干凈，但是火柴大了怎么辦？這是因?yàn)楫?dāng)凈化器的風量較大時，為了匹配相應功率的風扇，必然要匹配較大的，這樣相對會導致油煙量較小，風速在管道大，通過凈化器的時間變快。完全凈化從凈化器中耗盡，因此沒有效果。

　　It is worth noting that the air volume of jinan lampblack purifier should not be too large or too small. As we all know, matches are small, it is impossible to clean the kitchen lampblack, but matches big how to do? This is because when the air volume of the purifier is large, in order to match the fan with the corresponding power, it is necessary to match the larger one, which will relatively lead to smaller oil smoke, large wind speed in the pipeline, and faster time through the purifier. Complete purification is exhausted from the purifier and therefore ineffective.

　　當然，安裝也有一些原因會導致濟南油煙凈化器不能正常凈化油煙，但是對于安裝問題，我們可以交給安裝人員來解決。

　　Of course, there are also some reasons for the installation of jinan lampblack purifier can not purify lampblack normally, but for the installation problem, we can hand over to the installation personnel to solve.

　　如果油煙凈化器無法啟動，那很有可能就是電源損壞了。找廠家重新更換一個油煙凈化器的電源。電源與靜電場一樣，作為核心部件，更換成本較高?，F(xiàn)在市面上的油煙凈化器廠商對于電源部分還是相對比較重視的，電源發生故障的幾率并不太高。

　　If the lampblack purifier does not start, it is likely that the power supply is damaged. Find the manufacturer to replace a lampblack purifier power supply. The power supply, like the electrostatic field, is a core component that requires high replacement cost. Now the lampblack purifier manufacturers on the market pay more attention to the power supply part, and the probability of power failure is not too high.

　　油煙凈化器不能正常凈化油煙怎么辦？以上便是問題的相關解答，如果您還有問題就來這里m.shyrzs.com咨詢吧。

　　What if the lampblack purifier cannot purify lampblack normally? These are the answers to your questions. If you have any questions, please go to m.shyrzs.com.